Kamsons Chemicals Pvt.Ltd.



Kamicryl Elastofalt



We conduct payment procedure in a safe manner through both online and offline processes. Our transactions are supported by credit cards, PINless debit cards, cash, bank deposits, etc. Buy the best quality Kamicryl Elastofalt at market leading prices, from us. We are amid the prominent Suppliers in the town.

 

Uses : For waterproofing of

  • New roofs.
  • Balconies, terraces, parking garages, asbestos and concrete roofs.
  • Industrial washrooms & shower
  • Water reservoirs and swimming pools.
  • Foundations, cellar walls, retaining walls, bridges abutments.
  • Refurbishing of old waterproofing system including torch-on membrane.
  • Facade damp proofing.
  • Water proofing/Curing membrane and protective coating for sub structure.

 

Features :

  • Single component and cold applied.
  • Kamicryl Elastofalt has excellent UV resistance and long term ageing stability.
  • Cured membranes from Kamicryl Elastofaltremain highly flexible even at extremes of temperatures (-25oC to 120oC).
  • Excellent vapour barrier.
  • Easy to use.
  • Non-flammable and Non-toxic
  • Environment friendly.
  • Resistant to chlorides and sulphates commonly present in the soil.
  • Compatible with cementatious tiling adhesive.

 

Surface Preparation : All surfaces should be sound, clean and free of contaminants. Absorbent surfaces e.g. concrete should preferably be dampened with water. In kitchens, toilets and other wet areas all the openings should be properly sealed. On all weak points such as cracks or around the pipes use a woven fibreglass mesh as reinforcement between the two coats of Kamicryl Elastofalt.


Application :

  • Kamicryl Elastofalt can be applied by brush, roller or squeegee. Hot, dry or very porous substrate should be dampened with clean water prior to application of Kamicryl Elastofalt. When two or more coats are required, ensure that the preceding coat is fully dry before applying the successive coat, which should be applied at right angle to proceeding coat.
  • Kamicryl Elastofalt also acts as a non-degradable curing membrane; hence it may be applied immediately after the removal of mould, to the concrete structure, which has no aesthetic value such as the sub structure of the building.

 

Layer Thickness : 1.5 mm. For higher performance Glass Fibre reinforcement can be applied between 2 coats of Kamicryl Elastofalt.
Packing 200 kg drum.


Storage/Shelf life : Keep away from direct sunlight and store under normal warehouse conditions. Container must be tightly closed. Shelf life of the product is 12 months from the date of manufacturing provided it is stored in unopened factory packed drums


Cleaning : Tools may be cleaned with water as long as the product is wet. Once dry, by mechanical means only.


Health and Safety : Use normal safety precautions. Wear rubber hand gloves, safety shoes and safety goggles while using and handling the product. Avoid contact with skin and eyes. In case of accidental contact with eyes, wash with plenty of water and seek medical treatment immediately.



Typical Properties

Appearance Thixotropic black emulsion dries to a black
Flexible protective membrane.
Non-volatile content 65% min
Rubber Content on dry film Approx. 15%
Elongation (ASTM D 412) 900% approximately
Ultimate tensile strength;
(ASTM D 412)
2 N / mm2
Sp.Gr. 1.2 +/- 0.01
pH >9
UV and Ozone stability Excellent
Chemical stability Resists most common spills like oil and
Mild chemicals. Will not resist solvents
which will dissolve bitumen.
Temperature resistance -25/ + 120 Deg.C
Touch Dry 1-2 hours

Properties of dry film

Softening point R & B (ASTM D36 - 84) >120oC
Water vapour permeability (ASTM E96 - 92) >0.15gr/m2/day
Elongation at break (ASTM D412) >900%
Recovery at 350% elongation (ASTM D412) >50%
Resistance to water (ASTM D2939) No Blistering or re-emulsification
Protection of buildings against Ground water As per BS 102 Code of practice.
Curing membrane ASTM C 309:1998

Application

Primer 1 Part Kamicryl Elastofalt + 1 Part Water
Base Coat 1 Part Kamicryl Elastofalt (Diluted With
Water Upto 20% Max I.E. 4 Lts Max Per 20 Kgs
Bucket Of Kamicryl Elastofalt)
Top Coat 1 Part Kamicryl Elastofalt (Diluted With
Water Upto 10% Max I.E. 2 Lts Max Per 20 Kgs
Bucket Of Kamicryl Elastofalt)
  -
Coverage -
Primer 250 Grams/M2/Coat
Base Coat 0.5 Kg/M2/Coat
Top Coat 0.5 Kg/M2/Coat